為了滿足當前施工現場布置的要求，滿足文明施工的需要，需要在施工現場搭建各種各樣的木工加工棚，同時為了便于拆卸和運輸，提高周轉頻率，充分體現減排的效果，我們在施工現場搭建的時候，需要掌握一些方法和要求。

In order to meet the requirements of the current construction site layout and the needs of civilized construction, we need to build various woodworking sheds on the construction site. In order to facilitate disassembly and transportation, improve the turnover frequency, and fully reflect the effect of energy conservation and emission reduction, we need to master some methods and requirements when building on the construction site.

1、結構構件的強度滿足使用的要求

1. The strength of structural members shall meet the requirements of safe use

鋼柱采用100mm100mm6mm方鋼，上部承重結構采用桁架式鋼梁，梁桿件，采用D573mm，翼板與基礎連接部分采用10mm厚鋼板。螺栓為直徑12毫米的高強度螺栓，柱腳為直徑18毫米的高強度螺栓。

The steel column is made of 100mm100mm6mm square steel, the upper load-bearing structure is made of truss steel beams, the beam members are D573mm, and the connection between the wing plate and the foundation is made of 10mm thick steel plates. The bolts are high-strength bolts with a diameter of 12 mm and the column bases are high-strength bolts with a diameter of 18 mm.

2、整體性好，整體強度高

2. Good integrity, high overall strength

連接采用高強度螺栓，安裝后整體穩定性好，抗風荷載和頂部荷載能力強，與地面固定牢固，振動沖擊小，強度高。

High strength bolts are used for connection. After installation, it has good overall stability, strong wind load resistance and top load resistance, and is firmly fixed to the ground with low vibration impact and high strength.

3、節點少，安裝方便

3. Few nodes, convenient installation

與傳統扣件式腳手架相比，連接節點少，高強螺栓強度高，安裝操作方便。

Compared with the traditional fastener scaffold, it has fewer connecting nodes, high strength bolts and convenient installation and operation.

標準化：符合生產標準化的要求。標準化的裝配安裝、配色、結構可靠性能均滿足標準化要求。從現場實際安裝使用效果來看，視覺質量已經達到并能充分展示標準化，效果非常好。

Standardization: meet the requirements of production standardization. The standardized assembly, installation, color matching and structural reliability meet the standardized requirements. From the actual installation and use effect on site, the visual quality has reached and can fully display standardization, and the effect is very good.

標準化：產品的工廠化、定型化、標準化能充分展示它的標準化，滿足防護的基本要求，體現使用方便、布局整齊、美觀的特點。

Standardization: the industrialization, finalization and standardization of products can fully demonstrate its standardization, meet the basic requirements of protection, and reflect the characteristics of convenient use, neat layout and beautiful appearance.

施工現場搭建加工棚的特點要求相關的內容介紹完畢，您有什么想法嗎？可以隨時來我們網站進行http://m.dajiajie.cn咨詢！

After the introduction of the characteristics and requirements of the processing shed on the construction site, do you have any ideas? You can come to our website anytime http://m.dajiajie.cn consulting service